4.2 RAM - connection diagram of the motors
Configuration with delayed opening of the MOTOR no. 2
1
Main menu - LED L1 DELAY, LED OFF = MOTOR DELAY OF MOTOR NO.2
Configuration with delayed opening of the MOTOR no. 1
1
Main menu - LED L1 DELAY, LED ON = MOTOR DELAY OF MOTOR NO.1
Wire connection of motors to control unit (capacitor to be wired between the two phases)
OPEN
with OP1
COMMON
with CM1
CLOSE with CL1
24
COMUNELLO ®Copyright 2019 - All rights reserved
OPEN
with OP2
COMMON
with CM2
CLOSE with CL2
2
2