Maintenance Instructions - Fiamma CARAVANSTORE 190 Instrucciones De Montaje Y Uso

Idiomas disponibles

MAINTENANCE INSTRUCTIONS

All our awnings 'Made in Italy' and manufactured following high standards. Apart from our strict

quality controls, we also have our fabrics continuously controlled by inependent in stitutes to ensure

that the fabric is tear resistant, they can hold the weght of water, the colours don't fade and it is

resistent against atmospheric agents. In order to enjoy your awning for a long time, even for many

years after the purchase date, we ask you to take note of and follow the simple advices below:

MAINTENANCE INSTRUCTIONS FOR YOUR AWNINGS

Basic guideline to clean the fabric of the awning and the Privacy-Room

Make sure that your awning is completely dry and clean before closing it.

The remaining humidity could cause stains. If however you have no choice but closing the awning

when it is still wet, make sure to open it for drying within 12 hours maximum.

Most of the dirt is superficial and can be removed with clean water and a cloth or a brush.

If the fabric is very dirty, add some light cleaning detergent. Be aware never to use any aggressive

chemical substances and never to clean the fabric with a high pressure machine.

We recommend not to use the awning at a temperature below 0°C.

Additional information for the consumer

The awnings are made with precision, but some of the characteristics of the materials, which could

be interpreted as defects, derive from the materials and from the specific work processes, and these

characteristics occur even though Fiamma uses advanced and innovative machines production

techniques.

The following characteristics are not grounds for reclamation:

To guarantee a perfect quality, the fabrics are waxed or laminated several times.

During this operation, single coloured pigments could move and thus create small bright spots in the

material, which are only irregularities that are technically inevitable to avoid, but do not influence the

impermeability of the fabric. The fabric is therefore completely hermetic, also in these spots.

During the production of the material, small creases could form, which especially on bright fabric in

backlight could seem dark. Bright stripes (the so called white crease) are inevitable with these

materials.

With time the influence of weather could cause change in colour.

We recommend the installation of the Shock Absorbers standard delivered (G).

Before using the Caravanstore, check with your local dealer, in order to be sure that the

wall of your caravan is sturdy enough.

Fiamma declines any responsibility for possible damages to lightweight walls caused

during the use.