Maintenance And Repairs; Maintenance Operations - Stihl RM 650 T Manual De Instrucciones

– before remedying blockages, including
those in the discharge chute,
– before lifting or carrying the machine,
– before transporting the machine,
– before carrying out any work on the
mowing blade,
– before checking or cleaning the
machine or before carrying out any
other work (e.g. folding down the
handlebar, installing and removing the
mulching key) on it,
– after hitting a foreign object or if the
lawn mower begins to vibrate
excessively. In these cases check the
machine, in particular the cutting unit
(blade, blade shaft, blade fastening) for
damage and carry out the necessary
repairs before restarting and working
with the machine.
Risk of injury!
Strong vibration is normally an
indication of a fault.
In particular, the lawn mower must
not be operated with a damaged or
bent crankshaft or mowing blade.
If you do not have the appropriate
expertise, have the necessary
repairs carried out by a specialist
dealer (STIHL recommends STIHL
specialist dealers).
Stop the engine and disengage the
mowing blade:
– When pushing the machine to and from
the area to be worked.
– Before pushing the machine onto an
area not covered with grass.
– Before opening the discharge flap or
removing the grass catcher box.
50
– When the machine has to be tilted for
transportation.
– Before adjusting the cutting height.

5.8 Maintenance and repairs

Before beginning cleaning, adjustment,
repair and maintenance operations:
● Park the machine on firm and level
ground
● Stop the engine and allow it to cool
down
● Detach the spark plug
socket.
Caution – risk of injury!
Keep the spark plug socket
away from the spark plug; an inadvertent
ignition spark can result in fires or electric
shocks.
Inadvertent contact between the spark
plug and the spark plug socket can result
in unwanted starting of the engine.
RM 650 VE: Additionally remove the
battery.
Allow the machine to cool down before
working on or around the engine, exhaust
manifold or muffler in particular.
Temperatures of 80° C and above can be
reached. Danger of burns!
Risk of injury due to the mowing
blade!
Pulling the recoil starter rope starts
the work tool rotating. Always
ensure sufficient distance between
the mowing blade and your body,
particularly your hands and feet,
when you pull the recoil starter
rope.
Direct contact with engine oil can be
dangerous. Engine oil must not be spilled.
STIHL recommends leaving the task of
topping up engine oil or performing engine
oil changes to a STIHL specialist dealer.
Cleaning:
The complete machine must be cleaned
thoroughly following use. (
Empty the fuel tank (e.g. by running it
empty) before placing the machine in the
cleaning position.
Remove accumulated clipping deposits
using a stick. Clean the underside of the
mower with water and a brush.
Never use high-pressure cleaners and do
not clean the machine under running water
(e.g. using a garden hose).
Do not use aggressive cleaning agents.
These can damage plastics and metals,
impairing the safe operation of your STIHL
machine.
In order to prevent fire hazards, keep the
area around the air vents, cooling ribs and
the area of the exhaust free from
e.g. grass, straw, moss, leaves or
escaping grease.

Maintenance operations:

Only maintenance operations described in
this instruction manual may be carried out.
Have all other work performed by a
specialist dealer.
If you do not have the necessary expertise
or auxiliary equipment, please always
contact a specialist dealer.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
0478 111 9934 A - EN
14.2)