Oster CKSTPCEC8801 Manual De Instrucciones página 31

Multi-olla express
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO USE YOUR EXPRESS CROCK
Getting started:
Remove all packaging, paper, and cardboard (including any located between the Cooking
Pot and Heating Base).
Read and save the literature and be sure to read the service and warranty information.
Assembly:
Place Cooking Pot into the Heating Base.
Place Lid upon Multi-Cooker and align
aligning
with . To unlock, twist Lid clockwise and align
Locked Lid
A NOTE ABOUT PRESSURE COOKING
Pressure cookers generate steam in order to build pressure. Liquid is needed to create
steam. So in order for your Express Crock to build enough pressure to cook your meal,
there needs to be enough liquid in the pot to boil and generate steam. One cup – or 8
oz – of liquid (water, chicken broth, etc.) is usually enough liquid to successfully build
pressure. If your recipe is too thick or doesn't have enough liquid in it, then you will
receive an E6 Notification Code during the cooking cycle.
GETTING TO KNOW YOUR EXPRESS CROCK
1. Remove the Lid by turning clockwise to unlock, aligning
Sealing Gasket from the Lid and wash the gasket and the Lid in warm soapy water.
Dry the Sealing Gasket and Lid thoroughly before reattaching the Sealing Gasket to
the Lid. Ensure the Sealing Gasket is smoothly and securely in place in the gasket
holder. If the Sealing Gasket is not in the correct position the Lid will not be able to
form a seal and will not be able to gain pressure.
2. Remove the Cooking Pot and the Condensation Collector and wash in warm, soapy
water. Dry thoroughly before replacing back in the Multi-Cooker.
The Express Crock Multi-Cooker has been designed with safety in mind and has various
safety measures.
1. Pressure will not build if the Lid is not shut correctly and has not sealed.
2. Ensure Lid is in the completely locked position and the
3. Pressure will not build if the Steam Release Valve has not been switched to the Seal
position.
4. Over filling may cause a risk of clogging the valves and developing excess pressure.
CKSTPCEC8801_18SEM2 (LA).indd 5
MULTI-COOKER
with
. To lock, twist counterclockwise,
Unlocked Lid
Figure 2
E 5
with
.
Open Lid
with
. Remove the
is aligned with .
12/13/18 09:11

Publicidad

Tabla de contenido
loading

Tabla de contenido