Description Of The Accessory - CEMB SM628 Manual De Uso

4. DeScRIPTIon of THe AcceSSoRY

Standard Accessory
01 Up/down command valve
02 Bead pressing arm
03 Bead pressing arm release lever
04 Arm clamping hook
05 Bead pressing tool
06 Centring cone
07 Bead lifter arm
08 Bead pressing arm BPS
09 Bead pressing roller BPS
10. Curved arm
Before starting demounting it is important to check the code on the wheel which
indicates the type of Pax tyre - standard or Clippé -
For any work on the valve or on the pressure transducer, consult and follow the
operator's manual supplied by the transducer manufacturer.
14
PAX Accessories
B. Horizontal arm with cylindrical roller
C. PAX wheel support
D. Anti-rotation plug
E. Selector
F. Horizontal arm clamping handle
F1. Jack
H. Locking ring-nut
I. Locking ring-nut wrench
J. Double roller and claw tool (for clippé
wheels)
K. Bead inserter
L. Bead demounting lever
M. Rim guard (Réglette)
N. Small cone
O. Large cone
P. Tool securing pin
Q. Inclined disk (for clippé wheels)
R. PAX tyre fig.41
S. Support fig.41
T. Special Pax profile rim fig.41
U. Cylindrical roller
Y. Eccentric
X. Positioning pin
WARNING
WARNING
User's manual