CEMB SM628 Manual De Uso página 21

The positioning and the removal of the operating arm of the tyre changer from
the edge of the rim can be carried on only after having brought arms outwards
in non-working position.
2) Fit the additional fixed arm BPS to the device and lock it in position using the handle
provided (Fig. 16). Turn it clockwise to the limit stop position.
3) Align the rim clamping roller tangent to the outside diameter of the rim and lock it in
position using the handle provided; simultaneously position the bead depressor roller
and the bead depressor block near the mounting/demounting tool (fig 17).
4) Press the lever down to lower the BPS presser roller below the upper edge of the
wheel. Press the rotation pedal and mount the tyre.
2
1
Bringing the bead-pressing tool against the tyre creates a danger: the operator's
hands could be crushed between the tool and the rim. Be careful and keep your
hands far from the rim.
5) As the turntable turns the bead pressing tool will revolve with the tyre and keep the
bead in the well. The second bead will thus be mounted on the rim without any effort nor
danger to the operator or without risking to damage the tyre (Fig. 18).
REMARQUE: arrêter la rotation quand le presse-talon se trouve à proximité de l'outil
de montage/ démontage
When working with particularly stiff tyres or special rims, insert the supplied
bead presser gripper between mounting/demounting tool and the roller as
shown in fig. 19.
User's manual
WARNING
16
WARNING
WARNING
EN
17
21