Opening The Stand Cover Plate, Stand K Lab; Fig. 23 Opening The Stand Cover Plate, Stand K Lab - Zeiss Stemi 508 Instrucciones De Manejo

ZEISS
Fig. 23 Opening the stand cover plate,
stand K LAB
34
CARE, MAINTENANCE AND SERVICE
Maintenance
5.2.3
The transmitted-light base (Fig. 23/1) can be
removed from the stand cover plate (Fig. 23/3) for
cleaning or for removal of any foreign matter
which might have fallen in inadvertently.
•
Release the three screws (Fig. 23/2) from the
stand cover plate (Fig. 23/1) using an Allen key
SW 2.5 and put them aside.
•
Carefully lift the stand cover plate (Fig. 23/3) off
the transmitted-light base (Fig. 23/1) and put
the stand aside.
435064-7144-008
Stereo microscope
Opening the stand cover plate,
stand K LAB
Make sure that the cable (Fig. 23/4) is
not disconnected from the transmitted-
light base (Fig. 23/1).
To clean the LED, the optical elements
and the mirror, use a soft lint-free cloth,
a cotton wool bud wound around a
round wooden stick or a brush with
natural bristles, possibly
slightly in distilled water.
Stemi 508
moistened
09/2017