Connecting Stereo Microscope To The Power Supply; Switching Stereo Microscope On Or Off; Fig. 12 Connecting The Stereo Microscope - Zeiss Stemi 508 Instrucciones De Manejo

ZEISS
Fig. 12 Connecting the stereo microscope
Safe disconnection from the power supply is ensured exclusively by removing the mains plug.
The switch on the stereo microscope only switches into standby mode.
Do not replace detachable mains cables by inadequately designed mains cables. Only the
specified power supply lines may be used.
24
INSTALLATION

Connecting stereo microscope to the power supply

435064-7144-008
3.4 Connecting stereo microscope to
the power supply
•
Insert the mains cable (Fig. 12/2) in the mains
supply socket (Fig. 12/1) of the stand.
•
Connect the mains cable (Fig. 12/2) to a mains
supply socket outlet.
3.5 Switching stereo microscope ON or
OFF
•
Use the power switch (Fig. 12/3) to switch the
stereo microscope ON or OFF.
Stereo microscope
Stemi 508
09/2017