Interfaces On The Stereo Microscope Stemi 508 Doc (With Photo Output); Fig. 5 Front Optics, Stemi 508 (Example) - Zeiss Stemi 508 Instrucciones De Manejo

Stereo microscope
Stemi 508
2.3 Interfaces on the stereo microscope
Stemi 508 doc (with photo output)
1 Optional mount for eyepiece plates
∅ 26 mm
2 Eyepiece tube ∅ 30 mm to replace the
eyepieces
3 Exchangeable camera adapter 0.5x with
interface 60N and C-mount connector for
cameras up to 2/3"
4 Internal thread M50x0.75 to accommodate
the front optics
5 Internal thread M49x0.75 to accommodate
optical filters and analyzer for pol.
6 Mount ∅ 53 mm
7 Mount ∅ 76 mm for microscope body
8 Mount ∅ 84 mm for tables, insert plates
9 Guide for mounting secondary illumination
10 M8 thread to mount holding frame
(only stand K/M)
Thanks to the interface ∅ 76 mm, the Stemi 508 can also be used in conjunction with other stands of the
modular kit of the Stereo system – and other ZEISS stereo microscopes such as e.g. the Stemi 305, may
also be inserted in the stand K LED.
Front optics for Stemi 508
− External thread M50x0.75 for fastening in the
zoom body Stemi 508
− Internal thread M49x0.75 to accommodate
optical filters and analyzer for pol.
− Before screw-fastening the front optics 5 in the
microscope body Stemi 508 remove the dust
protection glass.
09/2017
DESCRIPTION
Interfaces on the stereo microscope Stemi 508 doc
435064-7144-008
Fig. 4 Interfaces on the Stemi 508
with stand K (schematic diagram)
Fig. 5 Front optics, Stemi 508 (example)
ZEISS
9