Use Of Product; Speed Selection - Hoover HHT6300/1X Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 78

8 USE OF PRODUCT

3 Spd Rocker Switch
3. Circulation Switch
3. Circulation Switch 
2 Spd Rocker Switch 
3 Spd Dgt Switch
1-
Press this button when you want to operate
the product in speed 1.
2-
Press this button when you want to operate
the product in speed 2.
Lamp Switch
Turn the switch to lamp
position to turn on the light
of the appliance. The
sliding set must be
detached to turn on lights.
If you want to run the
appliance at the third
speed move the switch
down.
If you want to run the
appliance at the third
speed move the switch
down.
The product has 2 lamps
and a switch to control
lighting. The sliding set
must be detached to turn
on lights.
3-
Press this button when you want to operate
the product in speed 3.
4-
Press this button when you want to turn on
the product lights.

Speed Selection

Appliance has is a 3-level ventilation. One of the
low-medium-high ventilation levels is selected
according to cooking and frying vapour. It is
started by pressing the motor control buttons on
the front panel. Electronic controlled models have
automatic timer.
Timer
If you press any of the motor starting buttons for
longer than 2 seconds, a timer function shall
activate with 15 minutes duration. Display shall
also give a signal when the timer starts and the
motor shall stop automatically 15 minutes later.
Cleaning Periods of the Metal Filter:
The filters must be cleaned when "C" signal
appears on the display or (depending on usage)
after every 2-3 weeks. When the filters are
cleaned and mounted in their places, press button
( ) for more than 3 seconds in order to delete
"C" signal (when the product is inactive). Letter
"E" will appear on the display, and the product will
switch to normal operation. If the operation is
desired to continue without deleting "C" signal,
when you push on ( ) button, active operation
will be observed for 1 sec. and then "C" signal will
reappear and the motor will continue to run.
A
ATTENTION
"C" mark will appear at the end of the product's
usage period of 60 hours.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido