Technical Specifications - Hudora Comfort Instrucciones De Montaje

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is designed for private/domestic use only. This product
is not designed for commercial/industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and
use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Balance bike Comfort
Item number: 10419/00, 10420/00, 10421/00
Adjustable saddle height: from approx. 30 – 42 cm
Recommended leg height: 35 – 50 cm
Recommended body size: 90 – 115 cm
Maximum user weight: 35 kg
Purpose: Balance bike for locomotion of children with a
max. user weight of 35 kg on non-public roads.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Balance bike with tool and screw set (see parts list p. 2)
1 x These instructions
Other parts which may be included with the delivery in some circumstances are
not required.
SAFETY INSTRUCTIONS
• WARNING! Protective equipment should be worn. Not to be used in traffic.
35 kg max.
• WARNING! Please ensure that your child wears the appropriate protective
clothing (helmet).
• WARNING! The balance bike is not equipped with a braking system since feet
provide the motion power to the driving wheels. Therefore, it is necessary to
wear shoes while using the bike. There is a risk of injury.
• This toy has to be used with caution since the use of the product requires
specific skills and knowledge to be able to avoid injury to the user and third
parties through a crash or collision.
• This product is only suitable for smooth paved surfaces. Do not use it on
public roads.
• The balance bike is only intended for use by one person.
• Do not allow your child to ride the balance bike at twilight, at night or in poor
visibility.
• To prevent putting your child or others in danger, you should not let the balan-
ce bike be used on roads or thoroughfares or on slopes or hills. Avoid using
it in the proximity of stairs or open water.
• Inspect the balance bike before each use to ensure that all parts are still fixed
in place correctly and that the balance bike is functioning as intended.
• This product contains small parts which could cause asphyxia if swallowed.
Supervise children during the assembling. This product must be assembled
by an adult. Children should only use the product when they are under adult
supervision.
• Please ensure that your child keeps both hands securely on the handlebars
in order to maintain better control over the bike.
• Recommended for use by children from approx. 3 years of age.
All images are examples of the design.
INSTRUCTIONS ON ASSEMBLY (Fig. 1 – 13)
1. The fork and rear wheel are pre-assembled on delivery
2. Loosen the rubber cap on the head of the fork. Then unscrew the Allen
screw at the head of the fork completely and remove it together with the
cover as shown in figures 1 and 2.
3. Attach the handlebar with stem to the fork as shown in figure 3. The heads
of the Allen screws point to the right side. Make sure that the handlebar
clamp integrated in the handlebar is pushed down as far as possible.
4. Screw the screw at the fork head together with the cover back onto the fork
as shown in figure 4. Be careful not to tighten the screw completely.
5. Make sure that the handlebar is in the correct 90° position to the frame
or parallel to the fork before tightening the handlebar clamp as shown in
figure 5.
6. Tighten the fork capscrew as shown in figure 6.
7. Put the rubber cap on the screw at the fork head as shown in figure 7 and 8.
8. Now mount the front wheel. First loosen the screws with the washers from
the axle and insert the axle ends into the holes at the lower end of the fork
as shown in figure 9.
9. Now screw the previously loosened screws and washers from the outside
into the internal thread of the axles as shown in figure 10. Mount the screws
evenly to reduce the tension in the fork and ensure the front wheel is cente-
red. Figure 11 shows a correctly mounted front wheel.
10. Insert the saddle into the seat tube and tighten the bolt on the seat clamp
to the desired saddle height as shown in figure 12. Make sure you do not
exceed the maximum seat height by not pulling the seat post out further
than the „MAX" mark, as exceeding the maximum seat height can cause
serious injury. Also make sure that the saddle is correctly aligned parallel to
the frame as shown in figure 13.
11. Then attach the handlebar impact protection to the handlebar stem using
the hook-and-loop fasteners.
12. Finally, inflate the tyres.The maximum air pressure should not exceed 2.4
bar. When inflating, please make sure that the tube lies evenly in the rim
and is not twisted. The casing must also sit evenly on the rim and must not
push the tube in at any point.
MAINTENANCE AND STORAGE
Use only a dry or damp cloth to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts beco-
me damaged or if sharp edges or corners should develop, the product may not
be used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly ma-
nuals at http://www.hudora.de/service/.
7/12