Technical Specifications - Hudora Big Wheel Instrucciones De Montaje

INSTRUCTIONS ON aSSEMBLY aND USE
EN
CONGRaTULaTIONS ON PURCHaSING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the
product. Therefore, please store them and the packaging carefully in case questions arise in
the future. Please always include these instructions when handing on the product to a third
party. This product must be assembled by an adult. This product is not designed for industrial
use. The use of the product requires certain capabilities and skills. Always adjust according to
the age of the user and use for the purpose it has been designed for.

TECHNICaL SPECIfICaTIONS

Item: HUDORA Big Wheel (Wheel size: 180 mm)
Item number: 14745, 14746, 14747, 14760, 14765, 14766, 14767, 14768
Dimensions: approx. 82 cm in length, deck. approx. 30 x 11,2 cm
Product weight: 3,5 kg
Class: A, 100 kg maximum user weight
If you have assembly problems or would like further information on the product, we have all you
need and more at http://www.hudora.de/.
CONTENTS
1 x scooter
1 x instruction leaflet
Other parts which may be included with the delivery in some circumstances are not required.
SafETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear personal protective equipment.
This includes at least: hand/wrist guards, knee pads, head protection and elbow pads.
Never use the scooter without shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. those which are flat, clean, dry,
and use the scooter where possible away from other road users. Avoid sloping ground. The
brakes may become hot if the scooter has been used for a while! Your footwear could be
damaged! The brakes shouldn't be touched until they have cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are intact and tight, e.g. the
folding mechanism and the height setting of the handlebar. The functions of self-securing
screw threads can be impaired after repeated loosening and tightening of the connecting
elements. Check especially for the correct alignment and fastening of the steering set-up.
• Make sure that the stand (if available) is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility. Do not use it on roads or
thorough-fares or on slopes or hills. Avoid being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about restricting applicable traffic regula-
tions for the intended area of application. It is intended for use on footpaths.
• The use of the product requires specific skills and knowledge to be able to avoid injuries due
to crashes and collisions.
• Children should only use the product when they are under adult supervision.
• Ensure when riding that the logo on the handlebar points to the front or else that the push
buttons is as such oriented backwards.
INSTRUCTIONS ON aSSEMBLY
No tools are required to assemble the product. The scooter is delivered in its transport form
(folded)! (Picture 1)
PLEASE PROCEED AS FOLLOwS TO GET THE SCOOTER READY FOR USE
• Pull on the lever to the right above the running board to loosen the transportation lock (Pic-
ture 2)
• Unfold the scooter's handlebars upwards.
• Now push the folding hinge towards the handlebar stem until you hear it click into place.
(Picture 3)
• Insert the handlebar grips into the T-section of the handlebar stem. Use your thumbs to
press down both locking buttons until the the grips can be easily pushed into the T-section.
Turn the handlebar grips until the locking buttons are positioned in the two openings in-
tended for them and you hear them click into place. Check that both handlebar grips are
fitted correctly by pulling both outwards. If they do not move, they have been assembled in
accordance with the instructions. (Picture 4)
• Loosen the quick release lock on the handlebar rod by pushing the lever of the quick release
lock until the lever is parallel to the handlebar grip. (Picture 5)
• The handlebars can be locked into place at 4 different heights. Pull the handlebar rod out
of the handlebar stem until it is at the required height and the relevant button has snapped
into place. (Picture 7) The maximum height cannot be exceeded due to the integrated lock.
If the handlebar does not sit firmly at the required height, open the quick release lock again
and turn it a few times so that the fastening bracket fits more tightly to the handlebar rod.
Repeat this process until the handlebar rod can be aligned securely. (Picture 6)
• Now close the quick release lock by pushing the lever down to the handlebar stem.
• Always check all parts before use to ensure they are fitting tightly, particularly the folding
mechanism, the handlebar locking and the wheels.
All images are examples of the design.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOwING ACTIONS
• Loosen the quick release lock by pushing the lever of the qucik release lock away from the
handlebar stem.
• Please press the locking button so that the handlebar rod can be moved. (Picture 7)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the handlebar stem.
• Use your thumbs to press both locking buttons in the handlebar grips and pull the handlebar
grips outwards until they are released completely from the T-section. (Picture 4)
• Push the handlebar grips down until they are parallel with the handlebar shaft.
• Pull the lever (to the right above the running board) in order to loosen the assembly lock.
(Picture 2)
• Fold up the scooter by moving the handlebar rod towards the back wheel until you hear the
transport lock click into place.
USaGE INSTRUCTIONS
NOTHING'S EASY AT FIRST ...
... most accidents happen to "beginners" within the first ten minutes. Particular care should
be taken during this stage.
DRIvING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off, just as with well-known children's
scooters. Braking is no problem either - simply step on the friction brake over the back wheel
(mudguard).
We recommend folding the scooter by hand after each use or using the stand (if available). Its
use is ensured through simply folding and unfolding. Aluminium is a good and light material but
should also be handled carefully as it is not as hard as steel, for example.
MaINTENaNCE aND STORaGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check
the product for damage or traces of wear and tear before and after each use. Do not make any
structural changes. For your own safety, please use original spare parts only. These can be
sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop,
the product may not be used any more. If in any doubt, please contact our service team (http://
www.hudora.de/service/). Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone.
Replace damaged or worn assembly parts in order to ensure the safety of your scooter.
wHEEL CHANGE
Replacement wheels are available as accessories from http://www.hudora.de/overview/
bigwheel/ and should be replaced when they are worn down. To change the wheels, loosen
the axle fitting with two Allen keys and take the wheels off the axle. A screwdriver or Allen key
can be used to push the bearings out of the wheel to use them in the new wheel. However, it is
usually advisable to change the bearings when the wheels are changed. Put the bearings into
the new wheel with the bolt spacer and mount them to the frame with the axle screws. Make
sure the axle has been screwed on tightly before starting again!
BEARINGS
Your scooter is equipped with precision ball bearings which were filled with lubrication at high
pressure during manufacture. For this reason, the wheels only run easily and quickly when
there is a load on the scooter. The bearings are maintenance free. If a bearing should fail, it
should be replaced completely. Bearings are available as accessories from http://www.hudora.
de/overview/bigwheel/.
DISPOSaL aDvICE
At the end of the product's life, please dispose of it at an appropriate collection point in your
area. Local waste management companies will be able to answer your questions on this.
SERvICE
We make every effort to deliver faultless products. If faults do arise however, we put just as
much effort into rectifying them. Therefore, you can find numerous information on the product,
replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.
de/service/.
SPaRE PaRTS aND ORIGINaL aCCESSORIES avaILaBLE aT:
http:/ /www.hudora.de/overview/bigwheel/
4/8