Operation - Unold 86850 Instrucciones De Uso

OPERATION

1. Ensure that the appliance is
standing on a suitable, level sub-
strate, and has been set up so
that it is safe and stable.
2. Plug the power cord into an elec-
trical outlet.
3. Press the ON/OFF button once to
switch the appliance on.
Setting the speed
4. Press the „Speed" button until
the appliance is working at the
desired speed. The setting is
shown by the respective indicator
light:
Low speed:
Medium speed:
High speed:
Swing function/oscillation
Press the „Oscillation (Swing)"
button to switch on the swing
function. Press the button again
to stop the appliance in the cur-
20
Timer
5.
Low
Switching off
Med
6.
High
Copyright UNOLD AG | www.unold.de
rent position, the fan however
continues to run.
Via the Timer button you can select
the desired runtime of the appli-
ance. This is possible in the range
0.5 to 7.5 hours in increments
of 30 minutes (e.g. 0.5 hours, 1
hour, 1.5 hours, etc.). Press the
„Timer" button until the indicator
light for the selected time is illu-
minated. After this time elapses
the appliance switches off auto-
matically. If you do not make a
time setting, the appliance will
run continuously.
Press the „ON/OFF" button again
or the „ON/OFF" button on the
remote control unit to switch
off the appliance. When you are
no longer using the appliance,
unplug the plug from the electri-
cal outlet.