Operation - Unold 86810 Instrucciones De Uso

9. Connect the front basket cover to the rear basket cover. Ensure that the
holes for the fastening screw at the bottom of the basket covers one above
the other. Fix the basket covers in place with the screw.
10. Check whether all parts have been correctly assembled and fixed in place.

OPERATION

1. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
2. Plug the mains plug of the appliance into an electrical outlet (220–240 V~,
50 Hz).
3. If moving the fan to a different location, switch off and unplug from the
mains.
Setting the tilt angle
4. You can tilt the motor housing verticaly to a certain extent. To do this, press
the motor housing into the desired tilt angle. To avoid damage to the appli-
ance, do not use force.
Setting the speed
5. Switch on the appliance by selecting one of the three speed levels and
pressing the appropriate button:
ƒ Level 1: Light breeze
ƒ Level 2: Moderate breeze
ƒ The level "0" switches off the appliance.
6. You can change the speed levels at any time.
Swing function/oscillation function
7. Press the oscillation button on the head of the appliance downward. The
appliance now swings autonomously.
8. If you want to switch off the swing function, pull the oscillation button
upward.
Switching off
9. Press the button "0" to switch the appliance off. When you are no longer
using the appliance, unplug the plug from the electrical outlet.
Stand 25.2.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
17 von 52