Checkweighing (Weighing With Tolerance Range) - KERN and SOHN ALT Manual De Instrucciones

9.1.3 Checkweighing (weighing with tolerance range)

Overview of display:
1. Current weighing value
2. Weighing assistance
3. Operating mode
4. Nominal value
5. Upper limit (Hi), lower limit (Lo)
6. Tolerance marker
too light
Nominal
value
too heavy
Operation
Call up menu item "M2 Checkweighing"
(see chap. 9.1)
Press button
01 - 02 Lower/upper limit – entering limit values
Use the cursor ( ► ) to select „01 Lower limit or
02 Upper limit"
Press the key; the current menu item blinks.
Use the arrow keys to enter limit values and confirm
with the key.
Notice: First enter upper limit.
66
Display
ALTPLT-BA-e-0721