Cleaning And Care; Risk Of Electric Shock; Risk Of Burns; Cleaning The Lid - Silvercrest KH 1115 Instrucciones De Uso

Note:
After you pour water in the water tank 1 for further
brewing processes, allow the coffee machine to
cool down for approx. 1 minute.

Cleaning and care

➪ Always remove the plug 6 from the power
socket before cleaning the appliance.

Risk of electric shock!

Before you clean the coffee maker you MUST remove
the plug 6 from the power socket.
NEVER submerge the Coffee Maker in water.
The appliance could become damaged!

Risk of burns!

Always wait until the coffee maker has cooled
down before cleaning it.
For cleaning, remove the lid 9 from the thermal jug 0
(see chapter "Using the thermal jug").
➪ Do not use household detergents or sharp/pointed
objects to remove soiling. These could damage
the appliance.
➪ Wipe the housing of the coffee maker and the
thermal jug 0 with a soft cloth lightly moistened
with a soapy solution.
➪ After every brewing process remove the filter
bag from the filter bag holder 4.
➪ Remove the filter and rinse the filter bag holder
and the thermos jug 0 under running water.
If you do not intend to use the coffee maker for an
extended period, pack the power cable into the
cable shaft 5.

Cleaning the lid

➪ To clean the lid 9, it must be dismantled:
➪ Carefully pull the silicon disc
part of the inflow lid
firmly, as this will be pressed up by the spring
➪ You can now remove the inflow lid
spring .
➪ Unscrew the securing disc
➪ Release the silicon ring
➪ Clean all parts in a mild soapy solution and dry
them well.
➪ To reassemble the lid 9 proceed in the reverse
order.
Note:
On reassembly, ensure that the side on the securing
disc with the two ribs points towards the lid
- 29 -
from the lower
. Hold the inflow lid
.
and the
from the lid .
from the securing disc
.
.