Displaying Text Information; Using Lists - Pioneer DEH-9350SD Manual De Instrucciones

Section
Operating this unit
02
Stopping playback of files on an SD memory card
1 Press the open button to open the front panel.
2 Remove the front panel.
3 Press on the SD memory card until it clicks.
The SD memory card is ejected.
4 Pull out the SD memory card.
5 Re-attach the front panel.
Selecting a folder
1 Push M.C. up or down.
Selecting a track
1 Push M.C. left or right.
Fast forwarding or reversing
1 Push and hold M.C. left or right.
Returning to root folder
1 Press and hold BAND/ESC.
Switching between compressed audio and CD-DA
1 Press BAND/ESC.
Notes
! When playing compressed audio, there is no
sound during fast forward or reverse.
! Disconnect USB storage devices from the
unit when not in use.

Displaying text information

Selecting the desired text information
1 Press DISP/
/SCRL.
Scrolling the text information to the left
1 Press and hold DISP/
/SCRL.
Notes
! Depending on the version of iTunes used to
write MP3 files to a disc or media file types,
incompatible text stored within an audio file
may be displayed incorrectly.
! Text information items that can be changed
depend on the media.
6
En

Using lists

When using the external storage devices, you
can select the desired song search method. One
is Selecting and playing files/tracks from the
name list and the other is Browsing for a song.
The searching method can be selected in the ini-
tial settings.
! When using a CD, you can only use Selecting
and playing files/tracks from the name list.
Selecting and playing files/tracks
from the name list
1 Press (list) to switch to the file/track
name list mode.
2 Use M.C. to select the desired file name
(or folder name).
Changing the file or folder name
1 Turn M.C.
Playing
1 When a file or track is selected, press M.C.
Viewing a list of the files (or folders) in the se-
lected folder
1 When a folder is selected, press M.C.
Playing a song in the selected folder
1 When a folder is selected, press and hold M.C.
Browsing for a song
1 Press (list) to switch to the top menu
of the list search.
Operating this unit
2 Use M.C. to select a category/song.
Changing the name of the song or category
1 Turn M.C.
Artists (artists)—Albums (albums)—Songs
(songs)—Genres (genres)
Playing
1 When a song is selected, press M.C.
Viewing a list of songs in the selected category
1 When a category is selected, press M.C.
Playing a song in the selected category
1 When a category is selected, press and hold
M.C.
Notes
! Before using this function, you need to oper-
ate the function in the initial setting menu.
Refer to Music browse (list setting) on page
10.
! This unit must create an index in order to fa-
cilitate Artists, Albums, Songs, and Genres
searches. Typically, it will take approximately
70 seconds to create an index for 1 000
songs, and we recommend that up to 3 000
songs be used. Please note that certain types
of file may take longer to index than others.
! Depending on the number of files in the USB
storage device, there may be a delay when
displaying a list.
! Keys may not have any effect during the cre-
ation of an index or list.
! Lists are recreated each time the unit is
turned on.
Advanced operations using
special buttons
Playing tracks in random order
1 Press
/iPod to turn random play on or off.
Tracks in a selected repeat range are played in
random order.
Selecting a repeat play range
1 Press
/LOC to cycle between the following:
CD/CD-R/CD-RW
! Disc repeat – Repeat all tracks
! Track repeat – Repeat the current track
! Folder repeat – Repeat the current folder
External storage device (USB, SD)
! All repeat – Repeat all files
! Track repeat – Repeat the current file
! Folder repeat – Repeat the current folder
Enhancing compressed audio and restoring rich
sound (sound retriever)
1 Press S.Rtrv to cycle between:
OFF (off)—1—2
1 is effective for low compression rates, and 2
is effective for high compression rates.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Play mode (repeat play)
1 Press M.C. to select a repeat play range.
For details, refer to Selecting a repeat play range
on this page.
Random mode (random play)