Important - GreenWorks CS-140-T Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTION
NOTE: Chainsaw comes from the factory with no bar and chain oil added. The level should also be checked
after every 20 minutes of use and refilled as needed.
NOTE: 1. Do not use dirty, used or otherwise contaminated oils. Damage may occur to the bar or chain. 2. It is
normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank after each use then
run for one minute. When storing the unit for a long period of time (three months or longer) be sure the chain is
lightly lubricated; this will prevent rust on the chain and bar sprocket.
I M P O R T A N T
To preserve natural resources, please recycle or dispose of oil properly. Consult your local waste
authority for information regarding available recycling and/disposal options.
BATTERY
TO INSTALL THE BATTERY:
1. Align the battery with the battery opening.
2. Insert the battery into the battery opening until the battery release button locks into place.
3. Push down on the battery until it locks into place. You should hear a "click" once it is
installed.
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido