Selecting Ringtones; A) Select Panel Ringtone - Fermax iLOFT DUOX Manual De Instalador

iL iL iL iL iLOFT DUO iL iL iL iL iLOFT DUO OFT DUO OFT DUOX X X X X OFT DUO OFT DUO OFT DUOX X X X X OFT DUO OFT DUO
OFT DUO
3.USER Menu: Function F2.
The F2 function sends an activation command
to be able to activate an auxiliary device.
The screen notifies of the action: F2 OK for 3
seconds.
This function is the default on the main screen
of the user menu.
The F2 command is sent by the bus, including
the monitor's address to activate the auxiliary
device connected to the bus, for example a
Duox relay (ask your installer).
4. USER Menu: User parameter settings
Within the user menu, upon selecting the option "User parameter settings" you access a
new screen corresponding to different configuration parameters, like the selection of
ringtones (street panel and guard unit), the reset of configuration parameters, the audio
conversation mode and user help.

4.1 SELECTING RINGTONES

The monitor allows you to select a ring tone independently for the panel and guard unit.
a) Select panel ring tone
4
4.1
4.2
Selecting this option you can change the ring tone
that is heard on the monitor when you make a call
from the street panel.
It allows you to assign up to 5 different ringtones.
4.3
4.4
Page 19