Programming: Administrator Menu Screen; Programming The Monitor; Option 1: From Panel; Option 2: From The Monitor - Fermax iLOFT DUOX Manual De Instalador

iL iL iL iL iLOFT DUO iL iL iL iL iLOFT DUO OFT DUO OFT DUOX X X X X OFT DUO OFT DUO OFT DUO OFT DUOX X X X X OFT DUO
OFT DUO

Programming: ADMINISTRATOR MENU Screen

There are several options:
1. Programming the Monitor address.

2. Resetting Parameters

3. About.

4. Audio induction loop.
Note: To access the Administrator Menu when
the monitor is programmed you must follow
these 2 steps:
1. Press the MENU button, access the screen
on the User Menu.
2. When on the User Menu screen,
simultaneously press these buttons: F1 +
(lock-release).
1. ADMINISTRATOR Menu: PROGRAMMING THE iLOFT MONITOR.
The monitor will not function until it has been programmed!
Note: A slow blue blinking LED means that the monitor is not programmed and once
programmed, the monitor's address is indicated via a red fixed LED.
There are two monitor programming options:
Option 1: From the panel.

Option 2: From the Monitor.

The white line below the icon indicates the function we are currently in. Upon pressing  it is
selected.
Option 1: From the panel.
Page 12
Programming from the monitor
Programming from the panel
The selected option is displayed with the white
line under the icon. Press , and you hear a
beep on the monitor.