Iloft Monitor - Fermax iLOFT DUOX Manual De Instalador

iL iL iL iL iLOFT DUO iL iL iL iL iLOFT DUO OFT DUOX X X X X OFT DUO OFT DUO OFT DUO OFT DUO OFT DUOX X X X X OFT DUO
OFT DUO

iLOFT MONITOR

LED
WITH induction loop
Buttons
Audio induction loop. It is identified with this symbol (depending on the model).
· It includes a loop that interacts with hearing devices for the hearing impaired.
· Note: For hearing devices with manual selection modes, Digital Mode should be
configured.
Buttons
Audio and Hang-up Activation Button.
· Upon receiving a call (the user has 30 seconds to answer before returning to
standby. During this time the red LED light will turn off, informing you that a call is
pending), press this button to talk to the visitor. The audio channel is opened from
street entrance to residence, (the blue LED lights up indicating a conversation with
the street entrance, and everything said will be heard by it), this is in hands-free
operating mode.
· Press after finishing the communication, (when finished the blue LED light again
turns off and the red light is turned on). The monitor's default internal timer is 90
seconds.
Notes:
- The conversation is private, no other terminal can hear it.
- "Hands free" mode is default mode.
- While the audio channel is open the input audio can be adjusted. See the
corresponding chapter on: "Audio Adjustments."
- If the monitor is configured to "simplex mode", (press to speak and release to
listen),
channel. From this moment on, each time you press the
channel is activated (constant blue LED light) and when releasing it it activates the
input audio channel (blue flashing LED light). To end a conversation, short-press
the key
- If there are various telephones in the same home, the audio will only come from
the first one picked-up, leaving the remaining phones in standby. If you try hanging
one of them up, a busy signal will sound.
Page 8
it is indicated with a flashing blue LED light, activating the input audio
.
key, the output audio