Installation Instruction - Twin-Star International 35HF500GRA-ESP Manual De Instrucciones

Take away the bracket and then drill 4pcs Φ 8mm,40mm deep holes on the wall. Put the plastic wall plug in to the hole.(Fig.4 )

If the wall is solid wood, drill 4pcs Φ 3.8 mm, 40mm deep holes on the wood and no needed of the plastic wall plug.
Note: When install the fireplace to the solid wood wall, please choose 16 Inches in length between the 2 holes. Ensure
locked to the stud of the solid wood wall.
Fix the bracket by 4pcs Φ 5 X 38mm screws. ( Fig. 5).

Hang the fireplace on the hooks at bottom and push the fireplace into the bracket and then fix it by 2pcs M5 × 8 screws.

(Fig.6)
Locate the pebbles on the fuel bed. (Fig. 7)

Install the fireplace front as picture. (Fig. 8)

Lock the pothook at the top with 2 screws ST 4 X 10mm. (Fig.9)

Note: To avoid the front door flame drop down to hurt person, pleas lock tight the pothook screws.

INSTALLATION INSTRUCTION

Fig. 4
Fig. 6
Fig. 8
E-4
Fig. 5
Fig. 7
Fig. 9