Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROLS
rd
PU4:
ON/OFF Motor 3
speed
nd
PU3:
ON/OFF Motor 2
speed
st
PU2:
ON/OFF Motor 1
speed
PU1:
ON/OFF Lights
5' timer function:
Pressing PU2 , PU3 or PU4 for two seconds when the
motor is set to the corresponding speed, the 5' timer
function is activated. The corresponding LED starts blinking
function.
to display this
If you change the speed while the timer is running, the
function is NOT deactivated. To deactivate the function,
press the blinking key for two seconds.
NOTE – the 5' timer function can be activated for
the normal speeds only (1st, 2nd, 3rd)
Filter alarm:
alarm is activated (all the LEDs come on). The alarm is
activated when the motor is off and remains displayed
for 30". To deactivate the alarm, press one of the keys
for 2" during alarm display. After 120 hours of motor
LEDs blink). The alarm is activated when the motor is
off and remains displayed for 30". To deactivate the
alarm, press one of the keys for 2" during alarm display.
PU1
PU2
P1:
5' TIMER
P2:
Filter alarm reset
P3:
Motor off / speed decrease – .
- holding down the button, the motor turns off sto-
ring the current speed
P4:
Motor on / speed increase
P5:
Lights on/off
L 1
Signalling crown:
-
Motor on:
-
5' TIM ER
function :
Filter alarm active:
-
P1
P3
P5
P4
P2
PU3
PU4
L1
Button TC1 (Lights)
Switches main light ON/OFF
When the main light is on, BL1 changes colour and becomes active.
When the button is pressed for more than a second, it switches the courtesy lights
(optional) on/off
Button TC2 (Motor-V1)
Motor ON/OFF - Activates the motor at 1st speed
Button TC3 (Motor-V2)
Activates the motor at 2nd speed
Button TC4 (Motor-V3)
Activates the motor at 3rd speed
Button TC5 (Motor-V4)
Activates the motor at 4th speed
Maximum speed is timed at a maximum of 5 minutes, after which 3rd speed is set
automatically.
When the motor is active, the LED of the last selected button (TC2-TC5) active to
signal which speed has been set.
Button TC6 (TIMER auto power off 5 min.)
Activates the TIMER function at the speed that has already been selected
If the motor is NOT active, it switches on the motor at the 1st speed and activates the
TIMER function
When the TIMER function is active, BL6 becomes active.
30h filter ALARM
After 30 hours of operation, an alarm switches on to signal the need for anti-grease
filter cleaning.
The filter alarm, when active, is displayed for 30 sec each time the motor is deactiva-
ted:
BL6 remains ON.
During this period, it is possible to reset the alarm by pressing the TC6 button for longer
than a second.
120h filter ALARM
After 120 hours of operation, an alarm switches on to signal the need for active carbon
filter (optional) replacement.
The filter alarm, when active, is displayed for 30 sec each time the motor is deactiva-
ted:
BL6 lighting blinking.
During this period, it is possible to reset the alarm by pressing the TC6 button for longer
than a second
Work Time Limit
If the hood is left on (lights and/or motor), after 10 hours in the absence of commands
from the user, it will automatically switch to OFF condition with all services switched off.
Buzzer
The Buzzer emits a "beep" each time that a command is set from the keyboard or
remote control (optional)
Button TC1 (Lights)
Switches main light ON/OFF
When the main light is on, BL1 changes colour and becomes active.
When the button is pressed for more than a second, it switches the courtesy lights
(optional) on/off
Button TC2 (Motor-V1)
Motor ON/OFF - Activates the motor at 1st speed
Button TC3 (Motor-V2)
Activates the motor at 2nd speed
Button TC4 (Motor-V3)
Activates the motor at 3rd speed
Button TC5 (Motor-V4)
Activates the motor at 4th speed
Maximum speed is timed at a maximum of 5 minutes, after which 3rd speed is set
automatically.
When the motor is active, the LED of the last selected button (TC2-TC5) active to
signal which speed has been set.
Publicidad
Tabla de contenido
