Wilier ULT38 KT Manual De Uso Y Mantenimiento página 10

W I L I E R . C O M # L OV E M Y W I L I E R
grease if they are running dry. You should as minimum
lubricate the bearings once per year.
MAINTENANCE OF YOUR WILIER TRIESTINA
FRONT WHEEL
1. Remove the disc brake allowing access to remove
the end-caps.
2. Wipe any dirt and contamination away from the
bearing, hub and end-cap.
3. Gently remove the bearing seal with a narrow blade.
Be careful not to cut the seal.
4. If necessary clean the bearing with a brush and
some light degreaser. Re-grease the bearing. Mount
the seal and the end-cap. Replace the disc brake
according to the manufacturers instructions.
MAINTENANCE OF YOUR WILIER TRIESTINA
REAR WHEEL
1. Remove the disc brake allowing access to extract
the axle.
2. Wipe any dirt and contamination away from the
bearing, hub and end-cap.
3. Gently remove the bearing seal with a narrow blade.
Be careful not to cut the seal.
4. If necessary clean the bearing with a brush and
some light degreaser. Re-grease the bearing and
mount the seal.
5. Repeat the same process for the freehub body and
re-assemble, replacing the axle and end-caps.
1 0