General Indications - Wilier ULT38 KT Manual De Uso Y Mantenimiento

1

GENERAL INDICATIONS

We thank you for buying the ULT 38 KT wheels, product
that will guarantee you security and functionality
through the years.
Before proceeding with using the wheels, please read
carefully the following instruction and store them in a
safe place for eventually reusing. Wilier Triestina spa
reserve to modify the content of this manual without
notice. The updated version will always be available
on www.wilier.com.
On our website you will also find information on the
other Wilier Triestina's products and the spare parts
catalogue.
In the box of wheel set you will find:
• The front wheel
• The rear wheel
• Wheel bag
• Vibrostop
• The manual of instructions and use of Wheels
• Official terms and conditions of warranty
Warning
!
Any modification or alteration (and graphic) of the
product with non-original spare parts or spare parts
not delivered directly by Wilier Triestina, involves the
expiration of the guarantee.
Warning
!
Direct and violent impacts on broken road surfaces
can cause damage to the rims. Such damage is
outside the conditions of our guarantee and repair
costs will be charged directly to the customer.
Warning
!
In case of strange impact caused from bad road base
or wheels transport, we trust to bring the wheels to
your mechanic for a check.
Warning
!
Only Shimano original lock ring designed for through
axle internal diameter 27mm to be used with the disc
brake.
Warning before using the bicycle:
• Check for proper operation and state of wear of all
the components before starting to ride.
• Check the tension of the spokes so as to notice
any spokes which got loose. In the case spokes
are loose, contact a qualified mechanic or special
personnel to perform the tensioning.
W I L I E R . C O M
ATTENTION, the use of wheels not centered properly
or with spokes broken and/or loosen or damaged
may cause an accident, serious injury or death.
• Check that the braking system and the brake pads
in the brake calipers are in good state and that the
screws on the disc or the locking ring of the disc,
depending on your model, are properly locked.
• To the users of more than 85kg weight,
Wilier Triestina spa suggests to check the wheels
status to the mechanic every two months or every
500km.
• We reccomend using these wheels if you weigh
more than 102 Kg
• Never wash the pieces with pressure-fed water
because water may get through the seals and cause
permanent damage to the internal components. We
recommend washing components with a sponge,
mild soap, and water.
• Salt water environments (as found on winter roads
and neat the seaside) can cause galvanic corrosion
on most bike parts. Carefully rinse, clean, dry and
re-lubricate all exposed parts to avoid damage,
malfunctions and accidents.
• If your component shows signs of rust, this means
it has to be changed urgently as it might be a sign
of damage.
2
HUBS
Warning
!
If you have any doubt whatsoever your service-repair
ability, please take your bicycle to a qualified repair
shop.
Before any maintenance operations on your wheels,
always wear gloves and protection glasses.
Use original spare parts exclusively provided by
Wilier Triestina spa
When replacing any broken sealed bearings please
ensure sealed Ceramic speed bearing correct
measure and specification are used.
Rear hub
Right side 26x17x5
Left side 26x17x5
The ULT 38 KT hubs are easy to maintain. To do it,
proceed as follows:
FRONT HUB
# L OV E M Y W I L I E R
7
Front hub
26x17x5
26x17x5