3. Push the position of the oven into the cabinet so that the
feet of the oven are fitted into the recesses of the Bottom
Duct assembly. make sure that the kit now rests flush with
the cabinet. See Illustration 6.
TINS-B003mRR1
MICROWAVE OVEN INSTALLATION INSTRUCTIONS
Illustration 6
4. adjust the frame so that the gap around the top of the
door and frame is even. Pre-drill 4 holes using an ¹⁄₈" bit,
using the kit to guide the holes. attach the built-in trim kit
frame with four screws B to the cabinet. See Illustration 7.
IMPORTANT: Install top left mounting screw first in order
to secure proper alignment of frame to oven face.
SCREw B
SCREw B
Illustration 7
SCREw B
SCREw B