Descargar Imprimir esta página

medi protect.Clavicle support Instrucciones De Uso página 3

Ocultar thumbs Ver también para protect.Clavicle support:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
protect.Clavicle support
Intended purpose
protect.Clavicle support is a brace for the clavicle. The product is
exclusively to be used for the orthotic fitting of the collarbone and only on
unbroken skin.
Indications
• Post-traumatic and postoperative fractures
• Acromio-clavicular luxation
Contraindications
• Constriction of the airways
• Compression of the vascular nerve bundle
Instructions for use
The Clavicula support is ready tu use. No measuring, cutting, padding and
tying as with the traditional tubular support.
2. Pull straps B and C under the arms and through the appropriate slots
1 and 2. Adjust the straps at the back and fix the underside in place by
pressing with the wrist / while exerting pressure with the wrist.
1. Put part A of the device over the head and place parts B and C over the
shoulders (see Figure 1).
Care instructions
Hand wash in cool, soapy water. Rinse thoroughly. Do not wring. Leave to
dry naturally. Do not iron. Soap residues can cause skin irritation and
material wear. The product can be worn in both fresh and salt water. After
wearing in water, rinse the product thoroughly with clean fresh water.
Leave to dry naturally. Do not remove stains using benzene or chemical
detergents.
    
Storage instructions
Keep the product in a cool, dry place and do not expose to direct sunlight.
Material composition
Polyester, cotton, polyamide
Warranty / contractual guarantee
Consistent with legal guidelines
Disposal
The product can be disposed of in the domestic waste.
English

Publicidad

loading