What's In The Case; Product Overview - General MMD900 Manual Del Usuario

WHAT'S IN THE CASE

The MMD900 comes in a custom molded plastic case along with a remote
pin-type probe and cable, a 9V battery, two pairs of replacement pins and this
user's manual. An optional deep wall moisture probe (General P/N MP905) is
available.

PRODUCT OVERVIEW

The figure shows all of the controls, indicators and physical features on the
front, bottom, top, back and right side of the MMD900. Familiarize yourself with
their positions and functions before moving on to the Setup Instructions.
A. Calibration check holes
B. Protective cover
C. 15mm replaceable test pins
D. Indicates display is
locked (frozen)
E. Measurement mode indicator
(REL shown)
F. Indicates beeper is
enabled
G. Indicates battery is
weak
H. Sensing area (on back of meter)
I. Jumbo LCD display
J. Five-function Mode button
K. Four-function
L. Slots for holding protective
cover (on bottom of meter)
M. Battery/spare pins compartment cover (on back of meter)
N. Tri-color 40-LED analog bar graph
O. Remote probe with 10mm test pins (shown with protective cap on)
P. Jack for remote probe
B
C
D
E
F
G
H
I
J
K
button
A
P
O
N
M
L
5