Getting Started
1
Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 6), the display shows: "CANCEL DEMO"
"VOLUME KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock and date
1
Press and hold
.
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour"
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day"
"PRESS"
"Minute".
"Month"
"Year".
9
Press
to exit.
To return to the previous setting item, press
3
Set the basic settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.) (Page 26)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[SOURCE SELECT]
[AM SRC]*1
[ON]: Enables AM in source selection. ; [OFF]: Disables. (Page 9)
[SPOTIFY SRC]*1
(For KD-X472DBT/KD-X272DBT)
[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables.
(Page 13)
[BT AUDIO SRC]*1
(For KD-X472DBT/KD-X272DBT)
[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables.
(Page 21)
[BUILT-IN AUX]*1
[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)
*1 Not displayed when the corresponding source is selected.
.
.
Default: [XX]
5
ENGLISH