Hilti HIT-ICE Manual De Instrucciones página 8

Hilti HIT-ICE
Adhesive anchoring system for rebar and anchor fastenings in concrete.
Hilti HIT-ICE
Contains: dibenzoyl peroxide(B), hydroxypropylmethacrylate(A)
(B)
Warning
H242
H315
H317
H319
H400
H412
P210
P262
P280
P302 + P352
P305 + P351 + P338
P333+313
P337+313
Disposal considerations
Empty packs:
▶ Leave the mixer attached and dispose of via the local Green Dot recovery system
▶ or EAK waste material code: 150102 plastic packaging
Full or partially emptied packs:
▶ Must be disposed of as special waste in accordance with official regulations.
– EAK waste material code: 08 04 09* waste adhesives and sealants containing organic solvents or
other dangerous substances.
– or EAK waste material code: 20 01 27* paint, inks, adhesives and resins containing dangerous
substances.
Content: 296 ml / 10.0 fl.oz.
8
Printed: 19.08.2016 | Doc-Nr: PUB / 5098739 / 000 / 03
(A,B) (B)
Heating may cause a fire.(B)
Causes skin irritation.(A)
May cause an allergic skin reaction.(A,B)
Causes serious eye irritation.(A,B)
Very toxic to aquatic life.(B)
Harmful to aquatic life with long lasting effects.(A)
Keep away from heat/sparks/open flames/hot surfaces – No smoking.
Do not get in eyes, on skin, or on clothing.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Weight: 470 g / 16.6 oz