Preliminary Checks; Lubrification - Daspi ULTRA Manual De Instrucciones

G
ENERAL SAFETY RULES
Our compliments for your
electromechanical barrier has been produced according to a high
quality and strict reliability, that's why it will assure you long-lasting
performance. This booklet will offer you all the pieces of information
you may need to install your barrier and to safe guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution is
unquestionably indispensable and nothing is better than
preventing accidents.
I
MPORTANT
Any installation or repair, or adjustment of the working
machinery by unqualified people is strictly prohibited unless all
the necessary precautions: power supply disconnected
(included possible batteries). All moving mechanism must be
provided with suitable protections.
DASPI is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for this
booklet and/or any unauthorized modification of the product. Keep
scrupulously this booklet enclosing it with technical brochure of
installation in a suitable place well-know by all the interested people.
You have to operate the elimination of the packing material
(cardboard, plastic, polystyrene, etc.) in conformity with the
regulations in force, remembering that for a child a plastic envelope
could be extremely dangerous.You have to teach the people employed
in using the automation about the control and security systems of the
installation.Don't install this product in explosive places.
S M
ECURITY ECHANISM
IN MOUVEMENT
DISTANCE
PRODUCT
The gear motor ULTRA has been planned and built
in order to opening industrial sliding gates with a
weight till 5.000 kg. It's an operator with a power
supply of 380 Vac three-phase and have a
mechanical clutch in oil bath. DASPI is not
responsible for any anomalous and different use of
the gear motor ULTRA.
IMPORTANT: The gear motor ULTRA is
provided with mechanical clutch and must be
inspecting periodically (every three months
aprox.) by qualified people.
USE OF THE AUTOMATION
As the automation can be controlled from the
distance through a remote control, and because of
the big weigth of the gates, you must always check
the full efficiency of all the safety devices and it's
necessary install a special devices for emergency
stop.
ENGLISH
excellent choice. Your new
D E
O NOT INSTALL THE LECTRIC SHOCK
AUTOMATION IN PLACE FULL
OF EXPLOSIVE MOISTURES
U
PKEEP
For any kind of upkeep, you have always to cut off the power supply.
For a correct upkeep of the installation where you have installed the
gear motor ULTRA follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the mechanical clutch (see the
paragraph "Adjusting of the mechanical clutch").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people
D
EMOLITION
You have to operate the elimination of the materials in conformity with
the regulations in force. All material must be divided by type (copper,
aluminium, plastic, electrical central unit). However there are not
material considered dangerous for the handler.
D
ISMANTLING
In order to dismantle or to move away the automation, follow these
instructions:
Cut off the power supply and disconnect the electrical installation.
Dismantle the control console and all the other components of the
installation.
If you have noticed that some components have been damaged, you
have to replace them.
U
SE
THE GLOVES

PRELIMINARY CHECKS

• Read carefully the instruction.
• Check that the product has not been damage
during the transport.
• Check that the gate structure is strong and that
during its movement there aren't friction points.
• Check that the electrical installation is in
accordance with the characteristic required by
the gear motor.
• Check that there is a suitable ground safety
system and that the metallic parts of the
installation are connected.
• Check that the manual manoeuvre always is
easily practicable.
• Remember that the automation makes easy the
use of the gate but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.

LUBRIFICATION

The gear motor ULTRA is provided with permanent
lubrification
U K
SE GLASSES EEP THE PROTECTION
FOR WELDING CARTER