Preliminary Checks; Lubrification - Daspi EPO Manual De Instrucciones

G
ENERAL SAFETY RULES
Our compliments for your excellent choice. Your new
electromechanical barrier has been produced according to a high
quality and strict reliability, that's why it will assure you long-lasting
performance. This booklet will offer you all the pieces of information
you may need to install your barrier and to safe guard your safety.
All our products have been made in conformity with the regulations
in force. We recommend using original part only, during the
installation and the upkeep. However, the caution is unquestionably
indispensable and nothing is better than preventing accidents.
I
MPORTANT
Any installation or repair, or adjustment of the working machinery by
unqualified people is strictly prohibited unless all the necessary
precautions: power supply disconnected (included possible
batteries). All moving mechanism must be provided with suitable
protections.
DASPI is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for this
booklet and/or any unauthorized modification of the product. Keep
scrupulously this booklet enclosing it with technical brochure of
installation in a suitable place well-know by all the interested people.
You have to operate the elimination of the packing material
(cardboard, plastic, polystyrene, etc.) in conformity with the
regulations in force, remembering that for a child a plastic envelope
could be extremely dangerous. You have to teach the people
employed in using the automation about the control and security
systems of the installation.Don't install this product in explosive
places.
S M
ECURITY ECHANISM
IN MOUVEMENT
DISTANCE
PRODUCT
The gear motor EPO has been planned and built in
order to opening swing gates with leaves length
max 3 mt. and with a maximum weight of 200 kg.
DASPI is not responsible for any anomalous and
different use of the gear motor EPO.
IMPORTANT: The gear motor EPO is not provided
with mechanical clutch and must be installed with
its DASPI control panel or with a control panel
provided with electronic clutch.
USE OF THE AUTOMATION
As the automation can be controlled from the
distance through a remote control, you must
always check the full efficiency of all the safety
devices. We recommend inspecting periodically
(every 6 Month) by qualified people the
adjustment of the electronic clutch. If you need to
calibrate the protection consult the paragraph
"Adjustment of the electronical clutch" in the
instruction booklet of the electronic central unit.
ENGLISH
D E
O NOT INSTALL THE LECTRIC SHOCK
AUTOMATION IN PLACE
FULL OF EXPLOSIVE
U
PKEEP
For any kind of upkeep, you have always to cut off the power supply.
For a correct upkeep of the installation where you have installed the
gear motor EPO follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the paragraph
"Installation of the electronic central unit").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
D
EMOLITION
You have to operate the elimination of the materials in conformity
with the regulations in force. All material must be divided by type
(copper, aluminium, plastic, electrical central unit). However there are
not material considered dangerous for the handler.
D
ISMANTLING
In order to dismantle or to move away the automation, follow these
instructions:
Cut off the power supply and disconnect the electrical installation.
Dismantle the control console and all the other components of the
installation.
If you have noticed that some components have been damaged, you
have to replace them.
U
SE
THE GLOVES

PRELIMINARY CHECKS

• Read carefully the instruction.
• Check that the product has not been damage
during the transport.
• Check that the gate structure is strong and that
during its movement there aren't friction points
• Check that the electrical installation is in
accordance with the characteristic required by
the gear motor.
• Check that there is a suitable ground safety
system and that the metallic parts of the
installation are connected.
• Check that the manual manoeuvre always is
easily practicable.
• Remember that the automation makes easy the
use of the gate but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.

LUBRIFICATION

The gear motor EPO is provided with permanent
lubrification
U K
SE GLASSES EEP THE PROTECTION
FOR WELDING CARTER