Preliminary Checks; Lubrification - Daspi MAGI Manual De Instrucciones

G
ENERAL SAFETY RULES
Our compliments for your excellent choice.Your new electromechanical
gear motor has been produced according to a high quality and strict
reliability, that's why it will assure you long-lasting performance. This
booklet will offer you all the pieces of information you may need to install
your gear motor and to safe guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution is
unquestionably indispensable and nothing is better than
preventing accidents.
I
MPORTANT
Any installation or repair, or adjustment of the working machinery
by unqualified people is strictly prohibited unless all the
necessary precautions: power supply disconnected (included
possible batteries). All moving mechanism must be provided with
suitable protections.
DASPI is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for this
booklet and/or any unauthorized modification of the product. Keep
scrupulously this booklet enclosing it with technical brochure of
installation in a suitable place well-know by all the interested people.You
have to operate the elimination of the packing material (cardboard,
plastic, polystyrene, etc.) in conformity with the regulations in force,
remembering that for a child a plastic envelope could be extremely
dangerous. You have to teach the people employed in using the
automation about the control and security systems of the
installation.Don't install this product in explosive places.
S M
ECURITY ECHANISM
IN MOUVEMENT
DISTANCE
PRODUCT
The actuator MAGI has be designed for opening
swing gates with a maximum length of 2,2 mt and
weight of 150 kg per leaf.
DASPI is not responsible if MAGI is applied for a
different usage.
WARNING: The actuator MAGI works without
mechanical clutch, so it must be controlled by a
DASPI control panel, or by another control
panel with electronic clutch on board.
USE OF THE AUTOMATION
Important safety instructions. Warning: it is vital
for the safety of persons to follow all instructions.
Save this instruction. Do not allow children to
play with remote controls or fixed controls. Keep
remote control away from children.
As the automation can be controlled from the distance
through a remote control, you must always check the
full efficiency of all safety devices. We recommend
inspecting periodically (every 6 months) by qualified
people the adjustment of electronic clutch. If you need
to calibrate the protection consult the paragraph
"adjustment of electronic clutch" in the instruction
booklet of the control panel.
ENGLISH
D E
O NOT INSTALL THE LECTRIC SHOCK
AUTOMATION IN PLACE FULL
OF EXPLOSIVE MOISTURES
U
PKEEP
For any kind of upkeep, you have always to cut off the power supply.
For a correct upkeep of the installation where you have installed the
gear motor MAGI follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the paragraph
"Installation of the electronic central unit").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
D
EMOLITION
You have to operate the elimination of the materials in conformity with
the regulations in force. All material must be divided by type (copper,
aluminium, plastic, electrical central unit). However there are not
material considered dangerous for the handler.
D
ISMANTLING
In order to dismantle or to move away the automation, follow these
instructions:
Cut off the power supply and disconnect the electrical installation.
Dismantle the control console and all the other components of the
installation.
If you have noticed that some components have been damaged, you
have to replace them.
U
SE
THE GLOVES

PRELIMINARY CHECKS

• Read carefully the instruction.
• Check that the product has not been damage
during the transport.
• Check that the gate structure is strong and that
during its movement there aren't friction points
• Check that the electrical installation is in
accordance with the characteristic required by
the gear motor.
• Check that the actuators you have are adequate
to the dimension of the leaves.
• Check that there is a suitable ground safety
system and that the metallic parts of the
installation are connected.
• Check that the manual manoeuvre always is
easily practicable.
• Remember that the automation makes easy the
use of the gate but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.

LUBRIFICATION

The gear motor MAGI is provided with permanent
lubrification
U K
SE GLASSES EEP THE PROTECTION
FOR WELDING CARTER