Technical Data; Intended Use - Festool MFT 800 Manual De Instrucciones

Mesa funcional
Ocultar thumbs Ver también para MFT 800:
Tabla de contenido

Publicidad

2
Scope Of Delivery (Multifunction table plus
accessories)
• Table (1.1), consisting of profile frame, angular feet, table
top, and foldaway legs
• Support (1.2) for guide rail
• Guide rail (1.3) with deflector (1.10)
• Hinged holding device (1.4) for guide rail
• Angled unit (1.5) with hex wrench (1.6)
• Fence rail (1.7)
• Fence rail clamp (1.8)
• Adjustable stop AR-MFT (1.9)

Technical data

MFT 800
Table dimensions (length x width)
Table height:
- with foldaway legs
- without foldaway legs
Max. working width:
- with FS 800 guide rail, mounted crosswise
- with FS 1400 guide rail (accessory),
mounted crosswise
Max. workpiece thickness
Weight
MFT 1080
Table dimensions (length x width)
Table height:
- with foldaway legs
- without foldaway legs
Max. working width:
- with FS 1080 guide rail, mounted crosswise
- with FS 1400 guide rail (accessory),
mounted crosswise
Max. workpiece thickness
Weight

Intended use

The multi-function table is intended for fastening workpieces,
as well as for sawing and milling with Festool electric power
tools using the Festool guiding system.
Setting up and assembly
The attachment be fitted on the mulifunction table at various
positions.
In the standard position, as intended from manufacturer, the
operator stands on the long side of the table with the rigid
guide rail support unit (1.2). This side is designated in the
operating instructions with "in front".
Step 1: Setting up
Take the table out of the box and set it up by extending the
outside set of legs (2.2) until they click into position, and
then secure them by tightening up the knobs (2.4). Now
tighten up the second set of legs (2.1) following the same
procedure.
Stand the table up. You want to be sure your table is level. If
you are on an uneven surface, the right rear leg has an ad-
justable cap (2.5).
NOTE: The angular feet (2.3) have rubber caps on them so
that the table stands firmly even when the legs are folded
away, so it can be used on the floor or placed on a workbench.
590 x 725 mm
820 mm
205 mm
510 mm
625 mm
90 mm
20 kg
724 x 1164 mm
820 mm
205 mm
625 mm
1085 mm
90 mm
33 kg

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mft 1080

Tabla de contenido