Assembling The Stand; Assembly Procedure - Pioneer PDK-1012 Manual De Instrucciones

Assembling the Stand

Note
Always assemble it on a flat table etc.
Insert the screws in the holes vertically and do not tighten
them with more force than necessary.

Assembly Procedure

1
Secure the support column to the stand
with the Installation screws 1 (4 locations
on the left and right).
Using the enclosed hexagonal wrench, first loosely
attach the top attachment screw, then loosely attach
the bottom attachment screw.
Installation screws
(M8 x 16 mm: silver)
2
Fully tighten the Installation screws (4
locations on the left and right).
Fully tighten the attachment screws.
4
En
1