Using The Fl Ash; Shooting Movies; Viewing Images - Olympus VR-330 Manual Básico

3
Multi-connector
The battery is not fully charged at the time of
purchase. Before use, be sure to charge the battery
until the indicator lamp turns off (up to 3 hours).
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, or USB-
AC adapter may not be functioning as expected.
Date, time, time zone, and language
1
Press the n button to turn on the
camera.
● The date and time setting screen is displayed when
the date and time are not set.
2
Use FG to select the year for [Y].
3
Press I to save the setting for [Y].
4
As in Steps 2 and 3, use FGHI and the
Q
button to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order).
5
Use HI to select your home time zone and
press the Q button.
Use FG to turn daylight saving time ([Summer])
●
on or off.
6
Use FGHI to select your language and
press the Q button.
4 EN
Shooting with the optimum aperture
value and shutter speed
[Program Auto]
1
Press the n button to turn on the
camera.
If the [Program Auto] indicator is not displayed, press
H to display the function menu and then set the
shooting mode to P.
Press the n button again to turn off the camera.
2
Hold the camera and compose the shot.
3
Press the shutter button halfway down to
focus on the subject.
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
● The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
4
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
Using the fl ash
1
Select the fl ash option in the function menu.
2
Use HI to select the setting option, and
press the Q button to set.

Shooting movies

1
Press the R button to start recording.
2
Press the R button again to end recording.

Viewing images

1
Press the q button.
2
Use HI to select an image.