Honda F506 Manual De Explicaciones página 39

Ocultar thumbs Ver también para F506:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

3.Clean both filter elements if they are to be used.
Foam element:
Clean in warm soapy water, rinse and allow to dry thoroughly. Or clean
in high flash-point solvent and allow to dry. Dip the element in clean
engine oil and squeeze out all the excess. The engine will smoke during
initial start-up if too much oil is left in the foam.
Clean
Paper element:
Tap the element lightly several times on a hard surface to remove
excess dirt, or blow compressed air through the filter from the inside
out. Never try to brush the dirt off; brushing will force dirt into the
fibers. Replace the paper element if it is excessively dirty.
4.Securely install the elements and the air cleaner cover.
5.Close the engine upper cover and turn the cover lock to the LOCK
position (see page 35).
36
Squeeze and dry
Do not twist.
Dip in oil
Squeeze
Do not twist.

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

F510

Tabla de contenido