Honda F506 Manual De Explicaciones página 42

6.Clutch lever cleaning
If the lock lever and clutch lever do not operate smoothly, or the clutch
engages by squeezing the clutch lever without pushing the lock lever,
disassemble and clean the clutch lever.
NOTE:
Be aware of the spring and collar coming off when you disassemble the
clutch lever. The spring and collar are located in between the right side
of the clutch lever and the handle bracket.
1.Pull off the snap pin from the lever fulcrum pin.
2.By holding the clutch lever, spring and collar, pull out the lever
fulcrum pin.
Detach the clutch lever, spring and collar.
3.Remove any dirt or foreign objects.
Wipe off and clean the fulcrum of the clutch lever and lock lever arm.
NOTE:
Do not apply any oil or cleaner liquid to the clutch lever, lock lever and
lock lever arm.
Oil or cleaner liquid will attract dirt and foreign objects.
LOCK LEVER ARM
FULCRUM PIN
CLUTCH LEVER
Align
CLUTCH LEVER
COLLAR
SPRING
FULCRUM PIN
LOCK LEVER
SNAP PIN
HANDLE BRACKET
HANDLE
BRACKET
LOCK LEVER ARM
FRONT
SNAP PIN
SPRING
SHORT
(Handle
bracket side)
COLLAR
LONG
(Clutch lever side)
39