Interrogate The Number Of Dispensed Coffees And The Cup Measures; Resetting The Machine To The Factory Setting (Reset); Reset Display Language - Fagor Xperta Instrucciones De Uso

12.4 Interrogate the number of
dispensed coffees and the cup
measures
The coffee machine has the facility to
display the total number of cups of
coffee made.
You can also display the cup measures
programmed for the three cup sizes.
Where 2 cups of coffee are dispensed
simultaneously, there are also counted
as 2 cups of coffee.
Press the „Menu" key (Fig. 3, f)
The menu point «LANGUAGE»
appears.
Press the paging keys
or d) until the menu point «INFO»
appears.
Confirm the menu point with the „OK"
key (Fig. 3, g). The display shows the
number of cups dispensed up to this
time, e.g. «QUANTITY
dispensed coffees.
Repeatedly press the paging keys
(Fig. 3, c or d) to indicate the cur-
rently saved cup measures for each of
the three cup sizes. The display shows
the selected cup size, e.g. «MEDIUM»
and in the second line, the correspond-
ing saved cup measure as a bar indica-
tion.
The max. bar indication corresponds to
the max. possible cup measure of ca.
240 ml.
To return to the coffee mode, press the
„Menu" key (Fig. 3, f)
30 sec. for the machine to automati-
cally return to the coffee mode.
12.5 Resetting the machine to the
factory setting (Reset)
This function is used to reset changes
you have made to the factory settings.
The following settings or saved values
are affected:
• Water hardness
• Cup measures/coffee quantities
• Coffee temperature
• Switch-off time
Press the „Menu" key (Fig. 3, f)
The menu point «LANGUAGE»
appears.
Press the paging keys
or d) until the menu point «RESET»
appears.
Confirm the menu point with the „OK"
key (Fig. 3, g). The display shows
«RESET».
Confirm the menu poin t with the „OK"
key (Fig. 3, g). The display shows
«RESET
.
machine is now reset to the factory
settings.
After programming, the machine
or (Fig. 3, c
returns automatically to the menu
point «RESET».
To return to the coffee mode, press the
„Menu" key (Fig. 3, f)
30 sec. for the machine to automati-
cally return to the coffee mode.
135» for 135

12.6 Reset display language

or
With this function you can reset the
machine to its status on first placing in
operation.
The following settings are not affected:
• Water hardness
• Cup measures/Coffee quantities
• Coffee quantities
• Coffee temperatures
• Switch-off time
Press the „Menu" key (Fig. 3, f)
and keep it pressed. Then press the
„On/Off" key (Fig. 3, h)
or wait ca.
shows the menu point
RESET».
Confirm the menu point with the „OK"
key (Fig. 3, g). The machine switches off.
You have now carried out a „Language
Reset" and the next time the machine
is placed in operation you must rese-
lect the language; see „Switching on
for the first time".
If you do not wish to carry out a „Lan-
guage Reset", press the „On/Off" key
(Fig. 3, h) at menu point
«LANGUAGE
or (Fig. 3, c
PROGRAMMED». The
or wait ca.
. The display
«LANGUAGE
RESET»
.
.