Publicidad
Idiomas disponibles
Idiomas disponibles
Mains
connection
Brief description
The sawdust blower removes sawdust
ahead of the cut – very practical when
sawing along a line.
The stroke-rate (= movements per
minute of the saw blade) can be infinitely
varied by means of the adjustment
wheel.(not for ST 400, ST 440)
Transparent cover for
optimum sawdust
removal.
The anti-splintering device
almost entirely prevents the
edge of the wood from
splintering. (Accessory*)
The base plate can be tilted to both sides
o
by 45
for bevel cuts.
The vibration damper permits quieter
running by means of a counterweight on the
plunger.
ENGLISH
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
2
The on-off switch is shaped in such a way that it can be
used from the forward or the rear holding position.
The on-off switch can be fixed in the
"On"- position for continuous operation
by means of the locking button.
I I I
The built-in pendulum stroke improves the cutting
performance. The pendulum stroke of the saw blade
means it is only pressed against the material on the
reverse stroke (working stroke) and lifted off the
material on the forward stroke.
Result: better extraction of sawdust, lower friction
–> higher cutting performance.
The pendulum stroke can be adjusted by the
pendulum stroke control and thus adapted to different
kinds of material. (not for ST 400, ST 440)
Modifications: Text, diagrams and data are correct at the time of printing.
In the interest of continuous improvement of our products, technical
specifications are subject to alteration without prior notice.
ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
Integrated suction channel for
connection to a
vacuum-cleaner.
Integrated tool storage for spare
blade.
Publicidad
