Machine Identification; Technical Data; Noise Emission Specifications - Mafell MF 26 cc Manual De Instrucciones

2.2 Machine identification

All details required for machine identification are available on the attached rating plate.

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Tool speed while idling
Tool speed at normal load
Cutting depth
Tool diameter
Tool mounting hole
Hose connector diameter
Weight without mains cable, without parallel guide fence
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Machining
The noise level measurement was carried out with a saw blade, adjustable groove cutter, slitting unit,
plasterboard and aluminium compound milling cutter supplied with the machine as standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
Protection class II
CE symbol to document compliance with the basic safety and health
requirements according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electric tools together with household waste material!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical
tools must be collected separately and recycled in an environmentally-
compatible manner.
To reduce the risk of injury, please read the operating instructions.
Sound power level
104 dB (A)
230 V~, 50 Hz or 110 V~, 50 Hz
1400 W (230 V)
7.0 A (230 V) or 10.0 A (110 V)
3600 - 6250 rpm
3600 - 6250 rpm
0 - 26 mm (0 – 1 1/32 in.)
max. 122 mm (4 51/64 in.)
20 mm
35 mm (1 3/8 in.)
5.0 - 6.6 kg (11 – 14.5 lbs)
250 x 330 x 215 mm (9 27/32 x 13 x 8 15/32
in.)
Workplace-related emission value
93 dB (A)
-22-