General Instructions - Viper FANG 32T-EU Manual De Usuario

ENGLISH
NOTE
Indicates a remark related to important or useful functions.

GENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.
The appliance must
− only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of
operating it
− only be operated under supervision
− not be used by children
The workplace is behind the cleaner.
Do not use any unsafe work techniques.
Always guide the cleaner with both hands on the handle.
When the cleaner is stationary, switch off the brush unit immediately to prevent damage to the floor covering.
Switch off the appliance and disconnect the battery plug in the following situations:
− Prior to cleaning and servicing
− Prior to replacing components
− Prior to changing over the appliance
Use of the cleaner is subject to current national regulations. Besides the operating instructions and binding accident prevention
regu-lations valid in the country of use, observe recognized regulations for safe and proper work.
TRANSPORT
When transporting the cleaner in elevators
− observe current safety regulations, in particular with regard to carrying capacity.
OPERATION
In order to prevent unauthorized use of the appliance, the power source is to be switched off or locked, for example, by
removing the key of the power switch.
Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
Before using the machine, close all doors and/or covers.
The machine working temperature must be between 0°C and +40°C.
The humidity must be between 30% and 95%.
Do not use the machine as a means of transport.
In case of fire, use a powder fire extinguisher, not a water one.
Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the
openings free from dust, hairs and any other foreign material which could reduce the air flow.
Do not remove or modify the plates affixed to the machine.
If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than
2
2.5 m/s (98/37/EEC-EN 1033/1995).
The Hand/arm vibration levels are well below 2,5 m/s
continuous working period.
10
USER MANUAL
2
(measured according to ISO 5349), which is the limit for an 8 hour