Alarm Setting; Sleep Timer; Factory Reset - Roadstar HRA-1500D+ Manual De Instrucciones

3 English
6. Use the [TUNING KNOB] (11) to select "Set Clock";
7. Confirm with the [ENTER] button (11);
8. Use the [TUNING KNOB] buttons (11) to adjust the hour;
9. Confirm with the [ENTER] button (11);
10. Use the [TUNING KNOB] buttons (11) to adjust the minutes;
11. Confirm with the [ENTER] button (11);
12. Repeat steps 10 and 11 to set the date.

ALARM SETTING

1. Press the [ALARM] button (7);
2. Use the [TUNING KNOB] (11) to select "Alarm 1" or "Alarm 2" setup;
3. Confirm with the [ENTER] button (11) to enter into the Alarm setting;
4. Use the [TUNING KNOB] (11) to select ON or OFF;
5. Confirm with the [ENTER] button (11);
6. Use the [TUNING KNOB] (11) to adjust the hour;
7. Confirm with the [ENTER] button (11);
8. Use the [TUNING KNOB] (11) to adjust the minutes;
9. Confirm with the [ENTER] button (11);
10. Use the [TUNING KNOB] (11) to set the days as follow:
Daily (Whole week).
•
Once (One day of the week).
•
Weekdays (Monday to Friday).
•
Weekends.
•
11. Confirm with the [ENTER] button (11);
12. Use the [TUNING KNOB] (11) to choose the alarm mode (Buzzer, FM or DAB);
13. Confirm with the [ENTER] button (11);
14. Use the [TUNING KNOB] (11) to adjust the volume;
15. Confirm with the [ENTER] button (11).
Note: To set the second Alarm, repeat all the steps with "Alarm2" instead of "Alarm1".
ALARM OFF:
During Alarm on, press [ALARM] button (7) to deactivate the alarm sound (the Alarm setting
remains) or press [SNOOZE] button (11) to postpone the alarm for 5 minutes.
DEACTIVATE ALARM SETTINGS:
ENTER the ALARM setup and at step 4 select "OFF" instead of "ON".

SLEEP TIMER

The sleep timer switches the radio off automatically after an adjustable time.
When the radio is ON press repeatedly the [SLEEP] (5) to choose the desired timer.
Note: To remove the sleep timer select "Sleep OFF".

FACTORY RESET

When the radio is ON:
1. Press and hold [MENU] (9) to access to the menu;
2. Use the [TUNING KNOB] (11) to navigate into the options and select "System";
3. Confirm with the [ENTER] button (11);
4. Use the [TUNING KNOB] (11) to select "Factory Reset";
5. Confirm with the [ENTER] button (11);
6. Use the [TUNING KNOB] (11) to select "yes";
7. Confirm with the [ENTER] button (11).