Power Source - Roadstar HRA-1500D+ Manual De Instrucciones

1 English
LOCATION OF CONTROLS
1. POWER ON - OFF / VOLUME KNOB
2. SPEAKER
3. DISPLAY
4. MODE BUTTON
5. SLEEP FUNCTION BUTTON
6. AUTOMATIC SCAN BUTTON
7. ALARM BUTTON
8. PRESET
9. MENU / INFO
10. 3.5mm JACK HEADPHONES OUT
11. TUNING KNOB / ENTER / SNOOZE FUNCTION
12. 3.5mm JACK AUXILIARY INPUT
13. DC SOCKET (FOR THE AC/DC ADAPTOR)
14. ANTENNA
PRECAUTIONS
INSTRUCTIONS - All the safety and operating instructions should be read before the radio is
•
operated. The manual should be retained for future reference.
HEED WARNINGS - All warnings on the appliance and in the operating instructions should be
•
adhered to.
WATER AND MOISTURE - The appliance should not be used near liquids or in rooms with a
•
high level of humidity.
VENTILATION - The appliance should be situated so that its location or position does not in-
•
terfere with its proper ventilation.
HEAT - The appliance should be situated away from heat sources such as radiators, stoves or
•
other appliances that produce heat.
POWER SOURCE - The radio should be connected to power supply only of the type described
•
in the operating instructions or as marked on the appliance.
POWER CORD PROTECTION - Power supply cord should be routed so that it is not likely to
•
be walked on or pinched by items placed upon/against them.
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and liquids
•
are not spilled into the enclosure through openings.
SERVICING - The user should not attempt to service the appliance beyond that descrive in the
•
user operating instructions. All the servicing should be referred to qualified service personnel.
Note: If the display does not function properly or no reaction to operation of any control may due to
the electrostatic discharge. Switch off and disconnect the AC cord then turn the power back on after
a few seconds.

POWER SOURCE

This unit works with an AC/DC adaptor of 6V - 1A. Connect the adaptor to the DC input (13)
at the back of the unit and into a wall AC power outlet.
Check that the rated voltage of the adaptor matches your local voltage.
Make sure that the DC plug is fully inserted into the appliance.
TO USE THE RADIO
1. Press the [POWER] button (1) to power ON;
2. (The first time you power on the radio, the radio will scan the DAB radio stations auto-