Video Mode; Camera Mode - Car and Driver CDC-629 Manual De Usuario

VIDEO MODE

Press the Power Button to start up the dash
cam. The CDC-629 automatically enters
Video Mode when powered on, and will start
recording. Press the REC/OK Button to stop
recording. Press and hold the REC/OK Button
to turn the night vision light on or off. Hold the
Left Button to switch between day and night
shoot modes, and hold the Right Button to
switch the lens combination (which cameras
appear on the Display Screen).
Access the Video Mode Menu by pressing the
Menu Button. There, you can change the video
resolution, and choose to enable or disable
sound while recording.
In case of an emergency, press the Lock
Button to save the current video. This will
ensure that, as the dash cam cycles through
its available memory, it will not overwrite the
locked file. Please note that locked files take
up space on the dash cam's memory, so be
sure to clear your memory card regularly to
ensure recording space.

CAMERA MODE

Once the dash cam is powered on, press
the Mode Button to enter Camera Mode.
Here, you can take photos using the REC/OK
Button. In the Camera Mode Menu, you can
adjust the picture resolution.
3