DANGER: RISK OF FLUID INJECTION AND LACERATION
WHAT CAN HAPPEN
• Your pressure washer
operates at fluid pressures
and velocities high enough
to penetrate human and
animal flesh which could
result in amputation or
other serious injury. Leaks
caused by loose fittings or
worn or damaged hoses
can result in injection
injuries. DO NOT TREAT
FLUID INJECTION AS
A SIMPLE CUT! See a
physician immediately!
HOW TO PREVENT IT
• Inspect the high pressure
hose regularly. Replace
the hose immediately if it is
damaged, worn, has melted
from contacting the engine,
or shows any signs of
cracks, bubbles, pinholes, or
other leakage. Never grasp a
high pressure hose that
is leaking or damaged.
• Never touch, grasp or
attempt to cover a pinhole or
similar water leak on the high
pressure hose. The stream of
water IS under high pressure
and WILL penetrate skin.
• Never place hands in front
of noz zle.
• Direct spray away from self
and others.
• Make sure hose and fit tings
are tight ened and in good
condition. Never hold onto
the hose or fittings during
op er a tion.
• Injuries can result if system
pressure is not reduced
before attempting
maintenance or
disassembly.
6
• Do not allow hose to contact
muf fler.
• Never attach or remove
wand or hose fittings while
sys tem is pres sur ized.
• When using replacement
lances or guns with this
pressure washer, DO NOT
use a lance and/or lance/
gun combination that
is shorter in length than
what was provided with
this pressure washer as
measured from the nozzle
end of the lance to the gun
trigger.
• To relieve sys tem pres sure,
shut off engine, turn off
water sup ply and pull gun
trigger until water stops
flowing.
• Use only accessories rated
equal to or higher than
the rating of the pressure
washer.