Care And Maintenance; Filter Care; Changing Filters - Winix HR1000 Manual De Instrucciones

Care and Maintenance

FILTER CARE

1. Changing Filters

When the Check Filter indicator LED is on, it is time to replace both the Anti-microbial
True HEPA and CD Carbon filters.
Filter
1 Pre-filter
2 CD Carbon filter
3 Anti-microbial True
HEPA filter
 Intervals between filter replacement may vary depending on environment.
 For optimal use Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
 Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
 The unit will automatically power off when front panel is opened.
Remove the front panel by grasping its
①
upper edge and gently pulling towards
yourself.
x To remove the front panel, the latch at the
lower edge of the panel must be released
from its position.
English
Indicator Light
-
When to
service
Clean once
every 14 days
Can NOT be
WASHED
Latch
When to
replace
Permanent
Lasts up to
12 months
14
HR 1000