l_[e]]_l]g
[]
OPENING
AND CLOSING
THE DISC DOOR AND
LOADING
DISCS
1
Press the
button
oN,
to turn
the
poweref
_
_
[_[
_
on
Lt gre
(Man unig
(RC909)
2
Press the
F NeT,ON
FUNCTION
FUNCTION
button
and set the
function
to "CD".
(Man
unig
(RC 909}
3
Press the
_-- button.
• The disc door
• When pressed n
the standby mode,
the power turns
on and the disc
(Mah unit}
(RC909/
door opens
4
Once
"Insert
Disc"
appears
on the
display,
load
the disc in the disc
holder
with
the
labeled
side facing
towards
you.
Be careful not to touch the disc's signal
surface
Make sure the disc door is fully opened
when
Ioadng discs
(Fig 1)
The door opens and closes whe_ the
function
s set to anythi_g other than
"CD",
but in this case the display does not
switch
5
The
disc is automatically
drawn
in
and the door
closes.
To eject the disc, press the _-- butto_
When the I_/11 button s
_LAVPAUS_
pressed after the disc is
_
(_
loaded, the disc door
doses and playback
StaFLS
(Main _n[t}
(RC909}
Disc holder
The disc holder s the
place in the disc door
here the disc is set
Fig,1
12 cm disc
NOTES:
• DO not load discs in the disc holder while the
disc door s opening or closing
Doing so may
cause the disc to fall from the disc holder
Make sure that "Insert Disc" is displayed
before loading the disc
• If your fi_lger, etc,
should get caught, keep calm
and press the -_ button
• Do not insert foreign objects into the disc
holder
Doing so could result in damage
• Do not press the disc door in when the power
is turned off
Doing so could result in damage
Removing
a disc that
has fallen
from
the
d sc ho der
_I) With
the disc door
open,
press the
VOLUME
v
button
and _/11
button
on
the
main
unit
simultaneously,
then
press
the B/RAND
button
within
3 seconds.
• "Holder DowrP' is displayed and tile disc holder
lowers
_
[_
Within
3 seconds
(Main unt)
(Main unig
(Main u/it)
12 Turn the main unit upside-down
and
remove the disc,
Note that the disc may be scratched
_3_ Press the button to turn the
oN _T_N_V
power off.
(Ma]n _n[t}
12