Metal Processing; Technical Data; Functional Description - Festool CARVEX PSC 420 EB Manual De Instrucciones

Metal processing

When processing metal, the following mea-
sures must be taken for safety reasons:
– Connect the machine to a suitable dust extractor.
– Regularly remove dust deposits in the motor
housing.
– Use a saw blade specifically designed for the cut-
ting of metal.
– Close the chip guard.
Wear protective goggles.
Health hazard by dust
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
Cordless jigsaws
Motor voltage
Stroke speed
Stroke length
Pendulum stroke
max. inclination (only with accessory angle table WT-PS 400)
max. cutting depth (depending on saw blade)
Weight without battery pack
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
[1-1] Chip guard
[1-2] On/Off switch
[1-3] Variable speed trigger (only PSBC 420 EB)
[1-4] Switch lock (only PSBC 420 EB)
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically treated
lumber.
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.

Technical data

Wood
Aluminium
Steel

Functional description

[1-5]
[1-6]
[1-7]
[1-8]
[1-9]
[1-10] Replaceable saw table
[1-11] Pendulum stroke switch
[1-12] Base runner
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
WARNING
PSC 420 EB
10.8 - 18 V
-1
1500 - 3800 min
1.02 '' (26 mm)
4 steps
45° to both sides
4-3/4'' (120 mm)
3/4'' (20 mm)
3/8'' (10 mm)
4.2 lbs (1.9 kg)
Adjusting wheel for stroke speed control
Buttons for releasing the battery pack
Extractor connector
Saw table change lever
Saw blade ejection
PSBC 420 EB
-1
1000 - 3800 min
9