Service And Maintenance; Environment - Festool CARVEX PSC 420 EB Manual De Instrucciones

WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!

Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
WARNING
Risk of injury, electric shock

Always disconnect the battery pack from the
machine before any maintenance or care work!
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festoolusa.com/service
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
18

Service and maintenance

EKAT
1
Do not open the battery pack or the charger. Even
after disconnection from the mains, there is still a
high capacitor voltage inside the charger.
Damaged safety devices and components must be
repaired or replaced in a recognised specialist
workshop, unless otherwise indicated in the oper-
ating manual.
Observe the following instructions:
– Keep the air slits on the machine and the charger
free and clean to ensure adequate cooling.
– Keep the contacts on the machine, charger and
battery pack clean.
– Check the guidance roller regularly for wear.
– Regularly remove dust deposits from the chip
guard.
– Regularly clean the base runner to prevent
scratches and cores on the surface.
instructions of the battery pack!

Environment

an environmentally responsible recycling centre.
Observe the respective national regulations.
4 Use only original Festool spare parts!
Order No. at:
5
3
2
www.festoolusa.com/service
For service, maintenance, disposal and
transport of the battery pack, note enclosed